/*********************************************************************
*
* Microchip USB C18 Firmware Version 1.2
*
*********************************************************************
* FileName: usbcfg.h
* Dependencies: See INCLUDES section below
* Processor: PIC18
* Compiler: C18 3.11+
* Company: Microchip Technology, Inc.
*
* Software License Agreement
*
* The software supplied herewith by Microchip Technology Incorporated
* (the 鼎ompany・ for its PICmicroｮ Microcontroller is intended and
* supplied to you, the Company痴 customer, for use solely and
* exclusively on Microchip PICmicro Microcontroller products. The
* software is owned by the Company and/or its supplier, and is
* protected under applicable copyright laws. All rights are reserved.
* Any use in violation of the foregoing restrictions may subject the
* user to criminal sanctions under applicable laws, as well as to
* civil liability for the breach of the terms and conditions of this
* license.
*
* THIS SOFTWARE IS PROVIDED IN AN 鄭S IS・CONDITION. NO WARRANTIES,
* WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
* TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
* IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
********************************************************************/
#ifndef USBCFG_H
#define USBCFG_H
/** D E F I N I T I O N S *******************************************/
#define MAX_NUM_INT 1 // For tracking Alternate Setting
#define EP0_BUFF_SIZE 8 // Valid Options: 8, 16, 32, or 64 bytes.
// There is very little advantage in using
// more than 8 bytes on EP0 IN/OUT, so 8 is the
// recommended value.
/* Parameter definitions are defined in usbdrv.h */
#define MODE_PP _PPBM0
#define UCFG_VAL _PUEN|_TRINT|_FS|MODE_PP
/* Uncomment only the hardware platform that you are using*/
#define PIC18F4550_PICDEM_FS_USB // 2011/12/6 コメントアウトした→うまくいかないので戻した
//#define PIC18F87J50_FS_USB_PIM
//#define YOUR_BOARD // 2011/12/6 コメントアウトに戻した
#if defined(PIC18F4550_PICDEM_FS_USB)
// #define USE_SELF_POWER_SENSE_IO // 2011/12/3 コメントアウトした
// #define USE_USB_BUS_SENSE_IO // 2011/12/3 コメントアウトした
#elif defined(PIC18F87J50_FS_USB_PIM)
//#define USE_USB_BUS_SENSE_IO //JP1 must be in R-U position to use this feature on this board
/*If using the YOUR_BOARD selection, uncomment below section as appropriate for your hardware*/
#elif defined(YOUR_BOARD) // 2011/12/6 コメントアウトを外した
//#define USE_SELF_POWER_SENSE_IO //See main.c and MCHPFSUSB Firmware User's Guide
//#define USE_USB_BUS_SENSE_IO //(DS51679) for more details about these features.
#else
#error Not a supported board (yet), See __FILE__, line __LINE__, or double click on this text.
//See above commented section. You need to select the features your hardware will be using.
#endif
/** D E V I C E C L A S S U S A G E *******************************/
#define USB_USE_CDC
/*
* MUID = Microchip USB Class ID
* Used to identify which of the USB classes owns the current
* session of control transfer over EP0
*/
#define MUID_NULL 0
#define MUID_USB9 1
#define MUID_HID 2
#define MUID_CDC 3
#define MUID_MSD 4
/** E N D P O I N T S A L L O C A T I O N **************************/
/*
* See usbmmap.c for an explanation of how the endpoint allocation works
*/
/* CDC */
#define CDC_COMM_INTF_ID 0x00
#define CDC_COMM_UEP UEP2
#define CDC_INT_BD_IN ep2Bi
#define CDC_INT_EP_SIZE 8
#define CDC_DATA_INTF_ID 0x01
#define CDC_DATA_UEP UEP3
#define CDC_BULK_BD_OUT ep3Bo
#define CDC_BULK_OUT_EP_SIZE 64
#define CDC_BULK_BD_IN ep3Bi
#define CDC_BULK_IN_EP_SIZE 64
#define MAX_EP_NUMBER 3 // UEP3
#endif //USBCFG_H